CANADIAN PLYWOOD MILLS

Richply Literature

General Manager

Joe Andrews

Mill Address:
13911 Vulcan Way
Richmond, B.C.
V6V 1K7

Tel:(604) 278-9111
Fax:(604) 278-2617

Plywood Sales

Terry Davis, Vice President
Kathy Robinson, Sales Representative

13911 Vulcan Way
Richmond, B.C.
V6V 1K7

Tel:(604) 278-9111
Fax:(604) 278-2617

Website: www.richply.com

Mill Number: BC 858

Richmond Plywood Corporation Ltd.

Plywood Grades

GRADES (CSA, PS1-07, JAS, DIN, CE)	SPECIES (DFP, CSP, SPF, Group 1,2,3)	PANEL SIZES		REPAIRS
GRADES (CSA, PS1-07, JAS, DIN, CE)	SPECIES (DFP, CSP, SPF, Group 1,2,3)	Thickness	Width/Length	REPAIRS
GOOD ONE SIDE	DFP (Douglas Fir Plywood) CSP (Canadian Softwood Plywood)	6 mm to 24 mm	1220 x 2440 mm (4' x 8') 3' x 8' 125 x 250 2' x 8'	Wood patch Wood-based putty
SELECT TF		28.5 mm 5 ply/ 7 ply available on request
SHEATHING
OVERLAID

Plywood Products

NAME	SPECIFICATIONS	TYPICAL APPLICATIONS	COMMENTS
CANPLY Patented EASY T&G (Floor)	15.5 to 18.5 mm CSP 15.5 to 28.5 mm DFP Select TF, Sheathing grade	Subfloor, combined subfloor and underlayment, roof sheathing.	Brochures and samples available
CANPLY Patented EASY T&G (Roof)	12.5 mm DFP or CSP Sheathing grade	Roof or wall sheathing 2' x 8' available	No H-clips are required when using as roof sheathing. Brochures and samples available
RICHFLOR	8.5 mm DFP Solid Core Wood patch Full sand	Underlayment	Full warranty for that application. Brochures and samples available
RICHFLOR Subfloor	18.5 mm DFP	Subfloor	Full warranty for that application. Brochures and samples available
US - PTS	PS1-07	Underlay	Full Face / Scant Face
US - CDX	PS1-07
US - CCX	DFP or CSP
US - ACX	DFP - U.S. Thickness on request
ARMORBOND	8 to 19 mm DFP All Fir panels available MDO one and two sides. Backer available MDO two steps	Industrial sector, signs, playgrounds, store fixtures, soffits, fascias, where a good paintability is required.	Brochures and samples available
ULTRAFORM	COFI FORM PLUS 12.5, 17.5 & 19 mm DFP All Fir panel MDO one side/two side Oil and edge sealed 17.5 / 19 mm - 7 ply	Multiple use Concrete Form	Brochures and samples available. 2 x 8 available
SELECT PLUS	18.5 mm DFP Select TF grade Oiled and edge sealed 7 ply Double Sand	Concrete forms
PWF BLANKS	12.5, 15.5, 18.5 mm Coastal Balsam Fir T&G available	Permanent Wood Foundations
MARINE GRADE	DFP All Fir A face / B back By request: A face / A face Solid core using "B" veneers	Industrial sector	Marine grade plywood is not chemically treated to enhance its resistance to decay. If decay is a concern, it should be treated with a pressure-preservative to an appropriate standard

Special packaging, guaranteed wood patch, and other sizes available on request (premium).